Terminal Blocks

Mounting adapter for 5-wire terminal blocks, 221-505

PCB terminal, 5 pole, pitch 5 mm, AWG 28-12, 24 A, cage clamp, gray, 236-405

Strain relief housing for cable tie, 734-603

PCB terminal, 3 pole, pitch 5.08 mm, AWG 26-14, 15 A, screw connection, orange, 1760500000

Through terminal block, push-in connection, 0.14-1.5 mm², 2 pole, 17.5 A, 6 kV, gray, 3208100

Protective conductor terminal, push-in connection, 0.14-1.5 mm², 2 pole, 6 kV, yellow/green, 3208139

Warning cover for connection terminal, 3030006

Phase bar, cut to length, 1P+auxiliary switch, 57 HP, 100A for tunnel clamp/double clamp, A9XAH157

Phase bar, cut to length, 2P+auxiliary switch, 57 HP, 100A for tunnel clamp/double clamp, A9XAH257

Phase bar, cut to length, 3P+auxiliary switch, 57 HP, 100A for tunnel clamp/double clamp, A9XAH357

Phase bar, cut to length, 4P+auxiliary switch, 57 HP, 100A for tunnel clamp/double clamp, A9XAH457

Phase bar, cut to length, 3P+N+auxiliary switch, 57 HP, 100A for tunnel clamp/double clamp, A9XAH557

Phase bar, cut to length, 3P+auxiliary switch, 3 phases, 57 HP, 100A for tunnel clamp/double clamp, A9XAH657

Commoning link for connection sub-base - for common DC - blue - 2 cm

Commoning link for connection sub-base - for common AC - red - 2 cm

Terminal block, 2 pole, 0.2-2.5 mm², clamping points: 2, gray, spring balancer connection, 24 A, NSYTRR22

Terminal block, 2 pole, 0.2-2.5 mm², clamping points: 2, blue, spring balancer connection, 24 A, NSYTRR22BL

Ground terminal, 2 pole, 0.08-2.5 mm², clamping points: 2, green/yellow, spring balancer connection, NSYTRR22PE

Knife disconnect terminal block, 2 pole, 0.8-4.0 mm², clamping points: 1, gray, spring balancer connection, 20 A, NSYTRR22SC

Disconnect terminal block, 2 pole, 0.8-4.0 mm², clamping points: 2, gray, spring balancer connection, 20 A, NSYTRR22TB