Adhesives

Special adhesive, type Cyanolit 202

This adhesive has a higher viscosity compared to the type 201 described above. For high strength plastic bonding (hard PVC, PA 6.2, ABS, PC/PMMA), or rubber (natural and nitrile rubber), micro cellular rubber, SBR)

Base: ethyl.

Viscosity: 100 mPa/s

Curing time: 7.0 to 20 s

Tension and shearing strength: 8.0 to 35 N/mm²

Application temperatures: - 80 to +80 °C

Quantity: 2.0 g pipette

Signal word: Warning

Hazard statements:

• H315 Causes skin irritation
• H319 Causes serious eye irritation
• H335 May cause respiratory irritation

Precautionary statements:

• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312 Call a POISON CENTRE/doctor/… if you feel unwell.
• P501 Dispose of contents/container to ...

Supplemental Hazard
information:

• EUH202 Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.

2C epoxy resin adhesive, type UHU plus endfest 300

Solvent-free 2C epoxy resin adhesive for for ultimate strength; Curing time and final strength (up to 30 N/mm²) depend on the temperature. Final strength after 12 h at room temperature. The bonding is impact-resistant and resistant against aging and dampness. Bonds metals, glass, porcelain, ceramic, wood, marble, stone, concrete, Duroplast, glass fiber-reinforced plastic, hard PVC, rubber, rigid foam plastic materials, e.g. Styrofoam®. Not suitable for bonding on large glass surfaces, PE, PP.

Pot time: up to 90 minutes

Package: 33 g

Signal word: Warning

Hazard statements:

• H315 Causes skin irritation
• H319 Causes serious eye irritation
• H317 May cause an allergic skin reaction
• H411 Toxic to aquatic life with long lasting effects

Precautionary statements:

• P101 If medical advice is needed, have product container or label at hand.
• P102 Keep out of reach of children.
• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P302+P352 IF ON SKIN: Wash with plenty of water/...
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P501 Dispose of contents/container to ...

Adhesive, UHU plus schnellfest

This 2C adhesive for metals, hardened plastics, hard PVC, hard PVC, glass fiber-reinforced plastics, glass, porcelain, ceramics, stone, concrete, wood etc.

Working time: 5.0 min

Handling strength: 20 min

Package: 33.5 g

Signal word: Warning

Hazard statements:

• H315 Causes skin irritation
• H319 Causes serious eye irritation
• H317 May cause an allergic skin reaction
• H411 Toxic to aquatic life with long lasting effects

Precautionary statements:

• P101 If medical advice is needed, have product container or label at hand.
• P102 Keep out of reach of children.
• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P302+P352 IF ON SKIN: Wash with plenty of water/...
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P501 Dispose of contents/container to ...

Supplemental Hazard
information:

• EUH208 Contains (name of sensitising substance). May produce an allergic reaction.

UHU PLUS SOFORTFEST 45705, 35g

Super fast, very strong and transparent two components epoxy resin adhesive.

Application range:

Not suitable for polyethylene (PE), polypropylene (PP), PTFE and silicone rubber.

Properties:

- Very fast

- Very strong

- Universal

- Joint filling

- Temperature resistant between -20 °C to +65 °C

- Waterproof, also against sea water

- Resistant to chemicals

- Can be painted after curing

- Can be used indoors and outdoors

- Transparent

Processing time: 2.0 min

Hand strength: 5.0 min

Signal word: Warning

Hazard statements:

• H315 Causes skin irritation
• H319 Causes serious eye irritation
• H317 May cause an allergic skin reaction
• H411 Toxic to aquatic life with long lasting effects

Precautionary statements:

• P101 If medical advice is needed, have product container or label at hand.
• P102 Keep out of reach of children.
• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P302+P352 IF ON SKIN: Wash with plenty of water/...
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P501 Dispose of contents/container to ...

Supplemental Hazard
information:

• EUH208 Contains (name of sensitising substance). May produce an allergic reaction.

Superglue gel, type Ergo 5039

With patented dosing lock, self-cleaning on closing (no bonding seizure), thixotropic, in infinitely variable and practical fine-dosing dispenser for overhead work or on vertical surfaces and uneven, porous components such as wood, fabric, cork, leather, plastic, metal, ceramic, stone, etc.

Operating temperatures: - 30 to +80 °C

Quantity: 20 g

Signal word: Warning

Hazard statements:

• H315 Causes skin irritation
• H319 Causes serious eye irritation
• H335 May cause respiratory irritation

Precautionary statements:

• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312 Call a POISON CENTRE/doctor/… if you feel unwell.
• P332+P313 If skin irritation occurs: Get medical advice/attention.

Supplemental Hazard
information:

• EUH202 Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.

High-performance adhesive, type Penloc GTI

Acrylate base 2C adhesive. Offers excellent flexibility, high force transmission and good thermal resistance. For steel, aluminum, copper, chrome, brass, nickel, zinc, polyester, PVC, ABS, epoxy resins, glass, wood, concrete, stone etc

Color: clear

Initial strength: 4.0 to 5.0 min, ultimate strength 4.0 to 6.0 h

Thermal resistance: - 30 to +150 °C

Package: twin cartridge 2 x 5.0 ml

Signal word: Danger

Hazard statements:

• H315 Causes skin irritation
• H319 Causes serious eye irritation
• H317 May cause an allergic skin reaction
• H335 May cause respiratory irritation
• H225 Highly flammable liquid and vapour
• H412 Harmful to aquatic life with long lasting effects
• H314 Causes severe skin burns and eye damage.

Precautionary statements:

• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P273 Avoid release to the environment.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P310 Immediately call a POISON CENTER/doctor/…

Thermally conductive adhesives for IC heatsinks, type Fischer WLK 30

2C epoxy resin adhesive for porous and non-porous surfaces, thermally conductive, electrically non-conductive, for porous and non-porous surfaces. Hardening time at 20 °C approx. 24 hours, at 25 °C approx. 8.0 hours, at 65 °C approx. 45 minutes, at 120 °C approx. 20 minutes

Mixing ratio: 1 : 10

Specific thermal resistance: 120 °C cm/W

Temperature range: - 56 to +150 °C.

Quantity resin/hardener: small bottle with 30 g/3.0 g

Signal word: Warning

Hazard statements:

• H302+H332 Harmful if swallowed or if inhaled
• H317 May cause an allergic skin reaction
• H341 Suspected of causing genetic defects
• H351 Suspected of causing cancer
• H411 Toxic to aquatic life with long lasting effects

UHU plus endfest 300 2-Component epoxy resin adhesive for dispensers 45735

Solvent-free 2C epoxy resin adhesive for for ultimate strength.

Pot time: up to 90 minutes. Curing time and final strength (up to 30 N/mm²) depend on the temperature. Final strength after 12 h at room temperature. The bonding is impact-resistant and resistant against aging and dampness. Bonds metals, glass, porcelain, ceramic, wood, marble, stone, concrete, Duroplast, glass fiber-reinforced plastic, hard PVC, rubber, rigid foam plastic materials, e.g. Styrofoam®. Not suitable for bonding on large glass surfaces, PE, PP.

Cartridge: 53 g

Signal word: Warning

Hazard statements:

• H315 Causes skin irritation
• H319 Causes serious eye irritation
• H317 May cause an allergic skin reaction
• H411 Toxic to aquatic life with long lasting effects

Precautionary statements:

• P101 If medical advice is needed, have product container or label at hand.
• P102 Keep out of reach of children.
• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P302+P352 IF ON SKIN: Wash with plenty of water/...
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P501 Dispose of contents/container to ...

Supplemental Hazard
information:

• EUH208 Contains (name of sensitising substance). May produce an allergic reaction.

Super glue, 34340, UHU

Super glue in a dispenser with easy grip system for precise applications. Ultra-fast and extremely strong liquid super glue in a shock_x0002_proof dispenser with easy grip system. Facilitates exact dosing drop-by-drop and is very easy and clean to handle. Dishwasher proof and water resistant.

Features

• Ultra fast and extremely strong
• Safe-standing and shock-proof dispenser
• Precise dosing drop-by-drop
• Easy and clean to handle

Signal word: Warning

Hazard statements:

• H315 Causes skin irritation
• H319 Causes serious eye irritation
• H335 May cause respiratory irritation

Precautionary statements:

• P101 If medical advice is needed, have product container or label at hand.
• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P302+P352 IF ON SKIN: Wash with plenty of water/...
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P501 Dispose of contents/container to ...

Supplemental Hazard
information:

• EUH202 Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.

Adhesive, UHU allplast

Strong general-purpose clear adhesive for plastics. High and low temperature-stable. Tasteless.

Tube: 30 g

Signal word: Danger

Hazard statements:

• H225 Highly flammable liquid and vapour
• H319 Causes serious eye irritation
• H336 May cause drowsiness or dizziness

Precautionary statements:

• P101 If medical advice is needed, have product container or label at hand.
• P102 Keep out of reach of children.
• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P501 Dispose of contents/container to ...

Supplemental Hazard
information:

• EUH066 Repeated exposure may cause skin dryness or cracking.

Special adhesive, type Cyanolit 503

Low viscosity, for bonding rubber (natural and nitrile rubber)

Base: ethyl.

Viscosity: 2 mPa/s

Curing time: 7.0 to 20 s

Tension and shearing strength: 8.0 to 35 N/mm²

Application temperatures: - 80 to +80 °C

Quantity: 20 g bottle

Signal word: Warning

Hazard statements:

• H315 Causes skin irritation
• H319 Causes serious eye irritation
• H335 May cause respiratory irritation

Precautionary statements:

• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312 Call a POISON CENTRE/doctor/… if you feel unwell.
• P501 Dispose of contents/container to ...

Supplemental Hazard
information:

• EUH202 Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.

Special adhesive, type Cyanolit Cristal 811 F

- New Formula -

General purpose adhesive. Decisive advantage of the cyanoacrylate adhesive is that it does not gas out, i.e. irritation of the mucous membranes is excluded even when working with the adhesive over a prolonged period of time. The adhesive does not leave any whitish deposits and therefore ensures immaculate bonding joints

Base: ethoxyethylene

Color: transparent

Viscosity: 10 mPa/s

Curing time: 10 to 45 s

Tension and shearing strength: 4.0 to 25 N/mm²

Application temperatures: - 80 to +80 °C

Quantzity: 20 g bottle

Signal word: Warning

Hazard statements:

• H319 Causes serious eye irritation

Precautionary statements:

• P264 Wash ... thoroughly after handling.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P337+P313 If eye irritation persists: Get medical advice/attention.

Supplemental Hazard
information:

• EUH202 Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.

Adhesives, type UHU Alleskleber Super Strong & Safe

Ultra-strong and fast bonding performance, repositioning possible within 20 s to one minute, suitable for almost any flexible, solid, porous and non-porous material.

Quantity: 7.0 g tube

Supplemental Hazard
information:

• EUH202 Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.

Thermally conductive adhesives for IC heatsinks, Fischer WLK 10

2C epoxy resin adhesive for porous and non-porous surfaces, thermally conductive, electrically non-conductive, for porous and non-porous surfaces. Hardening time at 20 °C approx. 24 hours, at 25 °C approx. 8.0 hours, at 65 °C approx. 45 minutes, at 120 °C approx. 20 minutes

Mixing ratio: 1 : 10

Specific thermal resistance: 120 °C cm/W

Temperature range: - 56 to +150 °C.

Quantity: 10g/1,0g

Signal word: Warning

Hazard statements:

• H302+H332 Harmful if swallowed or if inhaled
• H317 May cause an allergic skin reaction
• H341 Suspected of causing genetic defects
• H351 Suspected of causing cancer
• H411 Toxic to aquatic life with long lasting effects

Special adhesive, type Cyanolit 201

Low viscosity, for high strength plastic bonding (hard PVC, PA 6.2, ABS, PC/PMMA), or rubber (natural and nitrile rubber), micro cellular rubber, SBR)

Base: ethyl.

Viscosity: 2.0 mPa/s

Curing time: 7.0 to 20 s

Tension and shearing strength: 8.0 to 35 N/mm²

Application temperatures: - 80 to +80 °C

Quantity: 20 g bottle

Signal word: Warning

Hazard statements:

• H315 Causes skin irritation
• H319 Causes serious eye irritation
• H335 May cause respiratory irritation

Precautionary statements:

• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312 Call a POISON CENTRE/doctor/… if you feel unwell.
• P501 Dispose of contents/container to ...

Supplemental Hazard
information:

• EUH202 Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.

Thermally conductive adhesive, HERNON 746 SET-04

2C adhesive with short curing time, consists of the pasty adhesive (4.0 ml injector) and liquid activator (10 ml bottle).

Color: white

Bonding gap: max. 0.25 mm

Shearing strength: 5.5 N/mm²

Tensile strength: 15.2 N/mm²

Processing temperature: 20 to 28 °C

Operating temperatures: - 55 to +150 °C

Signal word: Danger

Hazard statements:

• H302 Harmful if swallowed
• H304 May be fatal if swallowed and enters airways
• H312 Harmful in contact with skin
• H315 Causes skin irritation
• H319 Causes serious eye irritation
• H336 May cause drowsiness or dizziness
• H410 Very toxic to aquatic life with long lasting effects
• H225 Highly flammable liquid and vapour

Precautionary statements:

• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor/…
• P321 Specific treatment (see ... on this label).
• P331 Do NOT induce vomiting.
• P370+P378 In case of fire: Use ... to extinguish.
• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

Superglue, universal, type Ergo 5012

With patented dosing lock, self-cleaning on closing (no bonding seizure), quick hardening standard type in adjustable, practical precision dispenser, for use on plastic, rubber, metal, fabric, leather, wood, ceramic etc.

Operating temperatures: - 30 to +80 °C

Quantity: 5.0 g dispenser

Signal word: Warning

Hazard statements:

• H315 Causes skin irritation
• H319 Causes serious eye irritation
• H335 May cause respiratory irritation

Precautionary statements:

• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312 Call a POISON CENTRE/doctor/… if you feel unwell.
• P332+P313 If skin irritation occurs: Get medical advice/attention.

Supplemental Hazard
information:

• EUH202 Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.

CA-Primer for Polyolefins, 12450010, WEICON

Many plastics cannot be bonded or can only be bonded to a limited extent without prior treatment. By pretreating these plastics with WEICON Contact Primer, a change in the surface structure is achieved. This enables the bonding of plastics that are otherwise difficult to bond, e.g. polyethylene (PE) and polypropylene (PP) from the group of polyolefins. Modern thermoplastic elastomers (TPE), PTFE and related plastics as well as silicones can also be bonded after pretreatment with WEICON Contact Primer.

Signal word: Danger

Hazard statements:

• H225 Highly flammable liquid and vapour
• H304 May be fatal if swallowed and enters airways
• H314 Causes severe skin burns and eye damage.
• H336 May cause drowsiness or dizziness
• H411 Toxic to aquatic life with long lasting effects

Precautionary statements:

• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P271 Use only outdoors or in a well-ventilated area.
• P273 Avoid release to the environment.
• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P391 Collect spillage.
• P304 IF INHALED:
• P310 Immediately call a POISON CENTER/doctor/…
• P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor/…
• P330 Rinse mouth.
• P331 Do NOT induce vomiting.
• P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
• P363 Wash contaminated clothing before reuse.
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P405 Store locked up.
• P403+P233 Store in a well-ventilated place. Keep container tightly closed.
• P501 Dispose of contents/container to ...

UHU PLUS SOFORTFEST 45675, 50 ml

Super fast, very strong and transparent two components epoxy resin adhesive. 50 ml cartridge for dispensers.

Application range:

Not suitable for polyethylene (PE), polypropylene (PP), PTFE and silicone rubber.

Properties:

- Very fast

- Very strong

- Universal

- Joint filling

- Temperature resistant between -20 °C to +65 °C

- Waterproof, also against sea water

- Resistant to chemicals

- Can be painted after curing

- Can be used indoors and outdoors

- Transparent

Processing time: 2.0 min

Hand strength: 5.0 min

Signal word: Warning

Hazard statements:

• H315 Causes skin irritation
• H319 Causes serious eye irritation
• H317 May cause an allergic skin reaction
• H411 Toxic to aquatic life with long lasting effects

Precautionary statements:

• P101 If medical advice is needed, have product container or label at hand.
• P102 Keep out of reach of children.
• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P302+P352 IF ON SKIN: Wash with plenty of water/...
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P501 Dispose of contents/container to ...

Supplemental Hazard
information:

• EUH208 Contains (name of sensitising substance). May produce an allergic reaction.

2C epoxy resin adhesive, type UHU plus endfest 300

Solvent-free 2C epoxy resin adhesive for for ultimate strength; Curing time and final strength (up to 30 N/mm²) depend on the temperature. Final strength after 12 h at room temperature. The bonding is impact-resistant and resistant against aging and dampness. Bonds metals, glass, porcelain, ceramic, wood, marble, stone, concrete, Duroplast, glass fiber-reinforced plastic, hard PVC, rubber, rigid foam plastic materials, e.g. Styrofoam®. Not suitable for bonding on large glass surfaces, PE, PP.

Pot time: up to 90 minutes

Package: 163 g

Signal word: Warning

Hazard statements:

• H315 Causes skin irritation
• H319 Causes serious eye irritation
• H317 May cause an allergic skin reaction
• H411 Toxic to aquatic life with long lasting effects

Precautionary statements:

• P101 If medical advice is needed, have product container or label at hand.
• P102 Keep out of reach of children.
• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P302+P352 IF ON SKIN: Wash with plenty of water/...
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P501 Dispose of contents/container to ...