FLUKE 1664FC SCH | Fluke
Installation tester, contains insulation pre-test, CAT III 500 V, CAT IV 300 V, Fluke FLUKE 1664FC SCH

Installation tester, 4547054, Fluke
The Fluke 1664 FC installation tester is the only meter of its kind with "insulation pre-testing." If the tester detects that a device is connected to the system under test, it stops the insulation test, helping to prevent accidental damage. The 1664 FC tester also features Fluke Connect ® so you can send test results to your smartphone and collaborate with others. Auto Test performs seven test steps at the touch of a single button, reducing the number of manual connections and decreasing the likelihood of making mistakes.
Features
- Autotest lets you perform line and loop impedance, RCD trip current and trip time, and insulation tests with a single connection and a single button press
- Additional mode with high test current for loop impedance measurement. Faster output of measurement results compared to loop impedance measurement without tripping the residual current devices (RCDs).
- Z-max memory for loop testing - easy evaluation of the highest reading during loop testing.
Version | contains insulation pre-test | |
Insulation resistance Min | 20 MΩ | |
Batteries | AA | |
Product type | installation tester | |
Insulation resistance Max | 1 Ω | |
Max measured value DC voltage | 500 V | |
Max measured value AC voltage | 500 V | |
Surge voltage category | CAT III 500 V, CAT IV 300 V | |
Degree of protection (IP) | IP40 |
SVHC free | Yes |
Date of RoHS guidelines | 3/31/15 |
RoHS conform | Yes |