PCB Production Equipment

Etchant, sodium peroxosulphate, type Bungard 73110-01

For etching in cuvettes

Etching temperature: +40 to +50 °C

Etching speed: 7.0 to 1.4 µm/minute

Copper absorption: max. 30 g/l

Preparation volume: 200-250 g/l water

Quantity: 1.0 kg

Signal word: Danger

Hazard statements:

• H272 May intensify fire; oxidizer
• H302 Harmful if swallowed
• H315 Causes skin irritation
• H317 May cause an allergic skin reaction
• H319 Causes serious eye irritation
• H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled
• H335 May cause respiratory irritation

Precautionary statements:

• P221 Take any precaution to avoid mixing with combustibles...
• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P220 Keep away from clothing and other combustible materials.
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P312 Call a POISON CENTRE/doctor/… if you feel unwell.
• P304 IF INHALED:
• P405 Store locked up.

Developer, type Bungard ALUCOREX 72110

For photo positive coated panels, for developing Alucorex. Bag for 1.0 l water. At a bath temperature of 20 to 25 °C, development is completed within a maximum of 2 minutes. This agent is intended for technical use only. It must be stored and used appropriately. Work material regulations should be observed.

Quantity: bag for 1.0 l water

Signal word: Danger

Hazard statements:

• H290 May be corrosive to metals
• H314 Causes severe skin burns and eye damage.

Precautionary statements:

• P260 Do not breathe dust/fume/gas/mist/vapours/spray.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
• P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P310 Immediately call a POISON CENTER/doctor/…

Tin powder for solder baths, SENO 3211

Soluble in 1.0 liter of approx. 40 to 60 °C hot water for high-quality immersion tin-plating bath that produces scratch-proof high layers of up to approx. 4.5 µ for tight connections and superior soldering properties.

Quantity: package of tin powder

Signal word: Danger

Hazard statements:

• H315 Causes skin irritation
• H317 May cause an allergic skin reaction
• H318 Causes serious eye damage.
• H341 Suspected of causing genetic defects
• H351 Suspected of causing cancer
• H361fd Suspected of damaging fertility. Suspected of damaging the unborn child.
• H373 May cause damage to organs
• H411 Toxic to aquatic life with long lasting effects

Precautionary statements:

• P260 Do not breathe dust/fume/gas/mist/vapours/spray.
• P273 Avoid release to the environment.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P310 Immediately call a POISON CENTER/doctor/…
• P391 Collect spillage.

Etchant, iron-III chloride, liquid, type Bungard 73131-01

40 %- solution with iron-III chloride, by adding 860 ml of water per liter it can be diluted to 30 weight percent. Other than sodium peroxosulphate, the etchant also produces satisfactory results in cold state, while its best performance is achieved at +40 to +50 °C. Iron chloride has a tendency towards the formation of sludge. This can be prevented by adding small quantities of hydrochloric acid to the used etchant (never add to fresh etchant).

Copper absorption: 50 g/l Cu

Etching speed: 30 to 10 µm / minute

Content: 1.0 liter

Signal word: Danger

Hazard statements:

• H290 May be corrosive to metals
• H302 Harmful if swallowed
• H315 Causes skin irritation
• H318 Causes serious eye damage.

Precautionary statements:

• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P234 Keep only in original packaging.
• P264 Wash ... thoroughly after handling.
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P301+P312 IF SWALLOWED: Call a POISON CENTRE/doctor/… if you feel unwell.
• P332+P313 If skin irritation occurs: Get medical advice/attention.
• P302+P352 IF ON SKIN: Wash with plenty of water/...

Positive resist remover, type 4010

General-purpose, acetone-free coat remover for all commonly used photo resist. Ideal for washing off etched drawings on the base material etc.

Quantity: 1.0 liter

Signal word: Warning

Hazard statements:

• H226 Flammable liquid and vapour
• H336 May cause drowsiness or dizziness

Precautionary statements:

• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P233 Keep container tightly closed.
• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P312 Call a POISON CENTRE/doctor/… if you feel unwell.
• P403+P235 Store in a well-ventilated place. Keep cool.

Fine-etching crystals, type Seno 3207

Modern, versatile and clean etching agent with especially even action for high contrast, low under-etching and unproblematic neutralization. Contrary to ammonium persulfate, this extraordinarily fine powder dissolves perfectly in water and does not crystallize even at 0 °C. The cold solution is only slightly aggressive. Splashes and spills can be rinsed off easily with water. This fine-etching crystal is an ideal alternative to iron-III chloride. Absolutely free of ammonium. Can be used many times over for all conventional processes. Etching machines with a high throughput rate should be equipped with a cooling system. This agent is intended for technical use only. It must be appropriately used, stored and disposed of. Work material regulations should be observed.

Operating temperatures: 30 to 40 °C, does not crystallize

Etching speed: (depends on the technique, temperature and copper content of the solution) is 30 to 8.0 my/min with an average copper transfer of 30 to 40 g/l

Optimal concentration: 200 to 240 g/l

Quantity: 220 g bag

Signal word: Danger

Hazard statements:

• H272 May intensify fire; oxidizer
• H302 Harmful if swallowed
• H315 Causes skin irritation
• H317 May cause an allergic skin reaction
• H319 Causes serious eye irritation
• H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled
• H335 May cause respiratory irritation

Precautionary statements:

• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P220 Keep away from clothing and other combustible materials.
• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P284 [In case of inadequate ventilation] wear respiratory protection.
• P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P342+P311 If experiencing respiratory symptoms: Call a POISON CENTER/doctor/...

Etchant, iron-III chloride, liquid, type Bungard 73131

40 %- solution with iron-III chloride, by adding 860 ml of water per liter it can be diluted to 30 weight percent. Iron chloride has a tendency towards the formation of sludge. This can be prevented by adding small quantities of hydrochloric acid to the used etchant (never add to fresh etchant).

Copper absorption: 50 g/l Cu

Etching speed: 30 to 10 µm/min. Other than sodium peroxosulphate, the etchant also produces satisfactory results in cold state, while its best performance is achieved at +40 to +50 °C

Content: liquid, 5.0 l

Signal word: Danger

Hazard statements:

• H290 May be corrosive to metals
• H302 Harmful if swallowed
• H315 Causes skin irritation
• H318 Causes serious eye damage.

Precautionary statements:

• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P234 Keep only in original packaging.
• P264 Wash ... thoroughly after handling.
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P301+P312 IF SWALLOWED: Call a POISON CENTRE/doctor/… if you feel unwell.
• P332+P313 If skin irritation occurs: Get medical advice/attention.
• P302+P352 IF ON SKIN: Wash with plenty of water/...

Conductive nickel pens, type Circuit Works CW 2000

For drawing nickel traces with good electrical and thermal properties, fast drying.

Content: 9.0 g

Signal word: Danger

Hazard statements:

• H226 Flammable liquid and vapour
• H331 Toxic if inhaled
• H319 Causes serious eye irritation
• H317 May cause an allergic skin reaction
• H351 Suspected of causing cancer
• H372 Causes damage to organs
• H410 Very toxic to aquatic life with long lasting effects

Precautionary statements:

• P201 Obtain special instructions before use.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P241 Use explosion-proof [electrical/ventilating/lighting/…] equipment.
• P273 Avoid release to the environment.
• P260 Do not breathe dust/fume/gas/mist/vapours/spray.
• P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
• P235 Keep cool.
• P501 Dispose of contents/container to ...

Developer concentrate for positive resist, type Seno 4006

For demanding applications. Highly efficient. Ideally used in developer cuvettes and developer machines. The amount of concentrate may vary slightly, depending on the substrate.

Solution: 1 part of developer concentrate and 9 parts of water

Quantity: 1.0 liter

Signal word: Danger

Hazard statements:

• H302 Harmful if swallowed
• H314 Causes severe skin burns and eye damage.
• H335 May cause respiratory irritation
• H360FD May damage fertility. May damage the unborn child.

Precautionary statements:

• P201 Obtain special instructions before use.
• P260 Do not breathe dust/fume/gas/mist/vapours/spray.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P310 Immediately call a POISON CENTER/doctor/…

Spray Positiv 20, type Kontakt Chemie 82009

For the transfer of transparent drawing templates (circuits etc.) to PCBs, front panels and similar.

Maximum photo-sensitivity: approx 340 to 420 nm

Content: 200 ml

Signal word: Danger

Hazard statements:

• H222 Extremely flammable aerosol
• H229 Pressurized container: may burst if heated
• H319 Causes serious eye irritation
• H336 May cause drowsiness or dizziness

Precautionary statements:

• P102 Keep out of reach of children.
• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P211 Do not spray on an open flame or other ignition source.
• P251 Do not pierce or burn, even after use.
• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P271 Use only outdoors or in a well-ventilated area.
• P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• P501 Dispose of contents/container to ...

Supplemental Hazard
information:

• EUH066 Repeated exposure may cause skin dryness or cracking.

Conductive pens for silver traces, type Circuit Works CW 2200

For creating highly conductive silver traces, jumpers, or shielding.

Quantity: 8.5 g

Signal word: Warning

Hazard statements:

• H226 Flammable liquid and vapour
• H319 Causes serious eye irritation
• H336 May cause drowsiness or dizziness
• H410 Very toxic to aquatic life with long lasting effects

Precautionary statements:

• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P241 Use explosion-proof [electrical/ventilating/lighting/…] equipment.
• P273 Avoid release to the environment.
• P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
• P235 Keep cool.
• P501 Dispose of contents/container to ...

Universal developer, type Seno 4007

For positive resist. NaOH-free powder concentrate for developing all standard resist. Very gentle developer bath for highest resolution.

Solution: depending on the base material 40 to 70 g/1.0 l

Can: 1.0 kg

Signal word: Danger

Hazard statements:

• H290 May be corrosive to metals
• H314 Causes severe skin burns and eye damage.
• H335 May cause respiratory irritation

Precautionary statements:

• P260 Do not breathe dust/fume/gas/mist/vapours/spray.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
• P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P310 Immediately call a POISON CENTER/doctor/…

Fine-etching crystal, SENO 3207

Modern, versatile and clean etching agent with especially even action for high contrast, low under-etching and unproblematic neutralization. Contrary to ammonium persulfate, this extraordinarily fine powder dissolves perfectly in water and does not crystallize even at 0 °C. Slightly aggressive. Splashes and spills can be rinsed off easily with water. This fine-etching crystal is an ideal alternative to iron-III chloride. Etching machines with a high throughput rate should be equipped with a cooling system. This agent is intended for technical use only. It must be appropriately used, stored and disposed of. Work material regulations should be observed. Free of ammonium. Can be used many times over for all conventional processes.

Operating temperatures: 30 to 40 °C, does not crystallize

The etching speed (depends on the technique, temperature and copper content of the solution) is 30 to 8.0 my/min with an average copper transfer of 30 to 40 g/l. The optimal concentration is 200 to 240 g/l

Quantity: 1.1 kg bag

Signal word: Danger

Hazard statements:

• H272 May intensify fire; oxidizer
• H302 Harmful if swallowed
• H315 Causes skin irritation
• H317 May cause an allergic skin reaction
• H319 Causes serious eye irritation
• H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled
• H335 May cause respiratory irritation

Precautionary statements:

• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P220 Keep away from clothing and other combustible materials.
• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P284 [In case of inadequate ventilation] wear respiratory protection.
• P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P342+P311 If experiencing respiratory symptoms: Call a POISON CENTER/doctor/...

Electronic sprays, type Cramolin Positiv Resist

For producing PCBs. The lacquer is used as photo-resist for the transfer of lines, shapes and outlines. A relatively simple method allows for precise copying of screen elements on diverse materials. The lacquer ensures good flow properties, quick drying, good contrasts and high edge precision.

Quantity: spray can, 200 ml

Signal word: Danger

Hazard statements:

• H222 Extremely flammable aerosol
• H229 Pressurized container: may burst if heated
• H319 Causes serious eye irritation
• H336 May cause drowsiness or dizziness

Precautionary statements:

• P211 Do not spray on an open flame or other ignition source.
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P271 Use only outdoors or in a well-ventilated area.
• P403+P233 Store in a well-ventilated place. Keep container tightly closed.