Flux

Acid-free solder creme, type FORTE

For high-speed soldering with low heat transfer, neutral flux residue. Reliably prevents oxidization particularly during soldering at higher temperatures (solder 300 °C, soldering tool 400 °C). The paste can be liquefied with alcohol to achieve an oily consistency while maintaining its effectiveness. Also suited for small solder joints up to 0.5 mm.

Signal word: Warning

Hazard statements:

• H317 May cause an allergic skin reaction

Precautionary statements:

• P101 If medical advice is needed, have product container or label at hand.
• P102 Keep out of reach of children.
• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P302+P352 IF ON SKIN: Wash with plenty of water/...
• P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
• P363 Wash contaminated clothing before reuse.
• P501 Dispose of contents/container to ...

Flux removal pens, type Circuit Works Lead-Free CW 9400.

For precise and controlled removal of residual flux of lead-free solder in seconds. With wedge-shaped fiber tip. Also suitable for use with lead containing solder.

Signal word: Warning

Hazard statements:

• H226 Flammable liquid and vapour
• H319 Causes serious eye irritation
• H410 Very toxic to aquatic life with long lasting effects

Precautionary statements:

• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P241 Use explosion-proof [electrical/ventilating/lighting/…] equipment.
• P273 Avoid release to the environment.
• P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
• P235 Keep cool.
• P501 Dispose of contents/container to ...

Flux, type Edsyn FL 22/FL 22 R.

For fine-pitch and SMD applications. The gel is applied precisely and sparingly on the SMD pads or areas to be soldered by means of conical dosing tip. This facilitates easy and comfortable soldering of standard joints

Signal word: Warning

Hazard statements:

• H315 Causes skin irritation

Precautionary statements:

• P202 Do not handle until all safety precautions have been read and understood.
• P270 Do not eat, drink or smoke when using this product.
• P262 Do not get in eyes, on skin, or on clothing.
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P411 Store at temperatures not exceeding …°C/…°F.
• P235 Keep cool.

Supplemental Hazard
information:

• EUH210 Safety data sheet available on request

Flux dispensers, type Edsyn FL 88 Fluxi.

For directed and precise application of flux to solder joints, easy operation, handy sleeve, ideal for intricate solder joints and SMD applications, perfect soldering tool results also with hot-air soldering

Signal word: Danger

Hazard statements:

• H225 Highly flammable liquid and vapour
• H319 Causes serious eye irritation
• H336 May cause drowsiness or dizziness

Precautionary statements:

• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P233 Keep container tightly closed.
• P241 Use explosion-proof [electrical/ventilating/lighting/…] equipment.
• P242 Use non-sparking tools.
• P243 Take action to prevent static discharges.
• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P271 Use only outdoors or in a well-ventilated area.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
• P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P312 Call a POISON CENTRE/doctor/… if you feel unwell.
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P337+P313 If eye irritation persists: Get medical advice/attention.
• P370+P378 In case of fire: Use ... to extinguish.
• P235 Keep cool.
• P403+P233 Store in a well-ventilated place. Keep container tightly closed.
• P405 Store locked up.
• P501 Dispose of contents/container to ...

Supplemental Hazard
information:

• EUH208 Contains (name of sensitising substance). May produce an allergic reaction.

Flux dispensers, type Edsyn FL 33 E Fluxi.

For targeted and precise application of No-Clean flux (F-SW 34) on the solder point by means of flexible brush tip, ideal for fine-pitch and SMD applications, faultless soldering results in combination with hot air and soldering irons

Signal word: Danger

Hazard statements:

• H225 Highly flammable liquid and vapour
• H319 Causes serious eye irritation
• H336 May cause drowsiness or dizziness

Precautionary statements:

• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P233 Keep container tightly closed.
• P241 Use explosion-proof [electrical/ventilating/lighting/…] equipment.
• P242 Use non-sparking tools.
• P243 Take action to prevent static discharges.
• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P271 Use only outdoors or in a well-ventilated area.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
• P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P312 Call a POISON CENTRE/doctor/… if you feel unwell.
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P337+P313 If eye irritation persists: Get medical advice/attention.
• P370+P378 In case of fire: Use ... to extinguish.
• P235 Keep cool.
• P403+P233 Store in a well-ventilated place. Keep container tightly closed.
• P405 Store locked up.
• P501 Dispose of contents/container to ...

Supplemental Hazard
information:

• EUH208 Contains (name of sensitising substance). May produce an allergic reaction.

No-Clean-Fluxing agent creme, 0FMKANC32-005, Ersa

No-Clean flux cream1);4) J-STD-004A/EN61190-1-1: ROL0, 5 ml cartridge, rosin-based, weakly activated, incl. plunger and a plastic dispensing needle (0.6 mm Ø)

Signal word: Danger

Hazard statements:

• H318 Causes serious eye damage.
• H412 Harmful to aquatic life with long lasting effects

Precautionary statements:

• P273 Avoid release to the environment.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P310 Immediately call a POISON CENTER/doctor/…
• P501 Dispose of contents/container to ...

Flux for manual and industrial solder joints, type Emil Otto DC 31645.

Halogen-containing, activated and highly effective resin solution for drag, wave, dip and manual soldering, compliant with specification F-SW 26 to with DIN 8511. The agent's particularly intensive effect is based in its organic, halogen-containing activators. It can be applied by foaming, brushing, dipping or daubing etc. Its density can be adjusted using ethyl alcohol or isopropanol

Signal word: Danger

Hazard statements:

• H225 Highly flammable liquid and vapour
• H317 May cause an allergic skin reaction
• H319 Causes serious eye irritation
• H336 May cause drowsiness or dizziness

Precautionary statements:

• P202 Do not handle until all safety precautions have been read and understood.
• P270 Do not eat, drink or smoke when using this product.
• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P243 Take action to prevent static discharges.
• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P271 Use only outdoors or in a well-ventilated area.
• P272 Contaminated work clothing should not be allowed out of the workplace.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
• P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
• P362+P364 Take off contaminated clothing and wash it before reuse.
• P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P312 Call a POISON CENTRE/doctor/… if you feel unwell.
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P337+P313 If eye irritation persists: Get medical advice/attention.
• P370+P378 In case of fire: Use ... to extinguish.
• P233 Keep container tightly closed.
• P403+P235 Store in a well-ventilated place. Keep cool.
• P405 Store locked up.
• P501 Dispose of contents/container to ...

Flux removal pens, type Circuit Works CW 9100.

For precise and controlled application with a chisel-shaped tip. Removes flux of the type No-Clean or colophony from PCBs (depending on the type).

Type: CW 9200, flux removal pen for colophony, 8.0 g

Signal word: Danger

Hazard statements:

• H225 Highly flammable liquid and vapour
• H319 Causes serious eye irritation

Precautionary statements:

• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P264 Wash ... thoroughly after handling.
• P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P337+P313 If eye irritation persists: Get medical advice/attention.
• P501 Dispose of contents/container to ...

Flux removal pens, type Circuit Works CW 9100.

For precise and controlled application with a chisel-shaped tip. Removes flux of the type No-Clean or colophony from PCBs (depending on the type).

Type: CW 9100, flux removal pen for No Clean, 9.0 g

Signal word: Warning

Hazard statements:

• H226 Flammable liquid and vapour
• H319 Causes serious eye irritation
• H410 Very toxic to aquatic life with long lasting effects

Precautionary statements:

• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P241 Use explosion-proof [electrical/ventilating/lighting/…] equipment.
• P273 Avoid release to the environment.
• P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
• P235 Keep cool.
• P501 Dispose of contents/container to ...

Flux pens, type Circuit Works Lead-Free CW 8400.

For precise and controlled application on lead-free solder joints. The wedge-shaped fiber tip is used to apply a high temperature-resistant, halogen-free No-Clean flux of class ROL0 to J-STD-004 that is compliant with the Bellcore TR-N-NWT-000078 and IPC SF-818 standards for insulation resistance. Also suitable for use with lead containing solder.

Signal word: Danger

Hazard statements:

• H225 Highly flammable liquid and vapour
• H319 Causes serious eye irritation
• H336 May cause drowsiness or dizziness
• H371 May cause damage to organs

Precautionary statements:

• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P241 Use explosion-proof [electrical/ventilating/lighting/…] equipment.
• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
• P235 Keep cool.
• P501 Dispose of contents/container to ...

Flux, type Edsyn FL110.

Synthetic, halogen-free NO CLEAN flux, F-SW 33, RE L0, with flexible brush for gentle application, suitable for fine pitch and SMD applications.

Type: FL110, 30 ml brush bottle

Signal word: Danger

Hazard statements:

• H225 Highly flammable liquid and vapour
• H319 Causes serious eye irritation

Precautionary statements:

• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P260 Do not breathe dust/fume/gas/mist/vapours/spray.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P403+P233 Store in a well-ventilated place. Keep container tightly closed.

Flux, type Circuit Works No-Clean Tacky Flux CW 8500.

For BGA solder joints, high stability and purity, halogen-free

Signal word: Danger

Hazard statements:

• H301 Toxic if swallowed
• H319 Causes serious eye irritation
• H350 May cause cancer

Precautionary statements:

• P201 Obtain special instructions before use.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P308+P313 IF exposed or concerned: Get medical advice/ attention.
• P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor/…
• P405 Store locked up.
• P501 Dispose of contents/container to ...
• P102 Keep out of reach of children.

Flux pens, type Circuit Works CW 8300.

For precise and controlled application on unleaded solder joints, water-soluble, pH neutral flux with ORH1 classification.

Signal word: Danger

Hazard statements:

• H225 Highly flammable liquid and vapour
• H318 Causes serious eye damage.
• H315 Causes skin irritation
• H336 May cause drowsiness or dizziness
• H412 Harmful to aquatic life with long lasting effects

Precautionary statements:

• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P241 Use explosion-proof [electrical/ventilating/lighting/…] equipment.
• P273 Avoid release to the environment.
• P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
• P305 IF IN EYES:
• P310 Immediately call a POISON CENTER/doctor/…
• P235 Keep cool.
• P501 Dispose of contents/container to ...

Flux gel Green Flash, type Edsyn ULF 20 SGR.

Ideal for solder tasks on non-ferrous metals and housing elements. The gel is applied precisely to the area to be soldered by means of a conical dosing needle. After cleaning, you can check the joints for flux residue using a UV light source

Signal word: Danger

Hazard statements:

• H314 Causes severe skin burns and eye damage.
• H335 May cause respiratory irritation
• H411 Toxic to aquatic life with long lasting effects

Precautionary statements:

• P260 Do not breathe dust/fume/gas/mist/vapours/spray.
• P273 Avoid release to the environment.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
• P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
• P363 Wash contaminated clothing before reuse.
• P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P310 Immediately call a POISON CENTER/doctor/…
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P391 Collect spillage.
• P403+P233 Store in a well-ventilated place. Keep container tightly closed.
• P405 Store locked up.
• P501 Dispose of contents/container to ...

Flux dispensers, type Circuit Works CW 8100.

Precise and controlled application with chisel tip. Applies a patented, anti-corrosive, halogen-free organic No-Clean flux that is compliant with Bellcore TR-NWT-000078 and IPC SF-818 standards for surface insulation resistance.

Signal word: Danger

Hazard statements:

• H225 Highly flammable liquid and vapour
• H319 Causes serious eye irritation
• H336 May cause drowsiness or dizziness

Precautionary statements:

• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P264 Wash ... thoroughly after handling.
• P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
• P337+P313 If eye irritation persists: Get medical advice/attention.
• P501 Dispose of contents/container to ...

Flux, type Edsyn FL112.

VOC- and halogen-free NO CLEAN flux, F-SW 34, RO L0 for difficult repair work, with flexible brush for gentle application, suitable for fine pitch and SMD applications.

Type: FL112, 30 ml brush bottle

Precautionary statements:

• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P337+P313 If eye irritation persists: Get medical advice/attention.

Liquid flux, T0051383199, Weller

Liquid flux (100 ml), suitable for simple soldering applications with high temperatures and long soldering times (e.g. wire and immersion tinning).

Signal word: Danger

Hazard statements:

• H225 Highly flammable liquid and vapour
• H315 Causes skin irritation
• H319 Causes serious eye irritation
• H335 May cause respiratory irritation

Precautionary statements:

• P102 Keep out of reach of children.
• P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
• P271 Use only outdoors or in a well-ventilated area.
• P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P233 Keep container tightly closed.
• P242 Use non-sparking tools.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P362 Take off contaminated clothing.
• P302+P352 IF ON SKIN: Wash with plenty of water/...
• P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
• P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• P332+P313 If skin irritation occurs: Get medical advice/attention.
• P337+P313 If eye irritation persists: Get medical advice/attention.
• P312 Call a POISON CENTRE/doctor/… if you feel unwell.
• P403+P233 Store in a well-ventilated place. Keep container tightly closed.
• P403+P235 Store in a well-ventilated place. Keep cool.
• P405 Store locked up.
• P501 Dispose of contents/container to ...

Flux, type Circuit Works Lead Free Tacky Flux CW 8700.

Lead-free, for BGA solder joints, high stability and purity, halogen-free

Signal word: Danger

Hazard statements:

• H301 Toxic if swallowed
• H319 Causes serious eye irritation
• H350 May cause cancer

Precautionary statements:

• P201 Obtain special instructions before use.
• P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
• P308+P313 IF exposed or concerned: Get medical advice/ attention.
• P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor/…
• P405 Store locked up.
• P501 Dispose of contents/container to ...