Skip to content Skip to navigation menu
Chemical Auxiliaries

Chemical Auxiliaries

To keep electronic and mechanical components in optimal condition, it is recommended to use special sprays and chemical aids. These protect, lubricate and seal various components, thereby ensuring flawless operation. Together with its product partners, Bürklin Elektronik offers a comprehensive range of special paints, agents for PCB production, cleaning agents, contact sprays, maintenance agents, sealing compounds and cold sprays. Important product information on application, storage and disposal can be found on the respective product detail pages. If you require further information, please do not hesitate to contact the service staff at Bürklin Elektronik! Please send your inquiry to the e-mail address info@buerklin.com - the service team will support you at any time!

Info in the Bürklin online magazine

Should you be looking for technical reading: In the online magazine you will find interesting articles on individual items and their areas of application. Bürklin Elektronik keeps almost all products listed in the online store in stock. This means that the items are ready for shipment immediately after receipt of your order. If the shipment of an ordered product is delayed, the service staff will inform you of the earliest possible delivery date!

  • 1(current)
  • 2
  • 3
1,162 Products found
    Article details
    Manufacturer details
    Contents
    Thickness
    Adhesive cement
    Price and Order
    Illustration can deviate

    Order No.: 12L546

    Manufacturer: N.A.

    Manufacturer No.:
    41520

     

     

     

    10 piece(s) €0.203
    50 piece(s) €0.157
    100 piece(s) €0.13
    500 piece(s) €0.112
    1000 piece(s) €0.103
    Without VAT, without shipping costs
    Price per piece(s)
    Minimum Order Quantity 10
      6017 piece(s) in stock
    piece(s)
    ROHS RoHS compliant version available, last updated: 08.06.2011
    Illustration can deviate

    Order No.: 12L6550

    Manufacturer: N.A.

    Manufacturer No.:
    10036075

     

     

     

    1 pack(s) €9.08
    10 pack(s) €8.23
    25 pack(s) €7.63
    50 pack(s) €7.15
    100 pack(s) €6.72
    Without VAT, without shipping costs
    Price per pack(s)
    Minimum Order Quantity 1
      680 pack(s) in stock
    pack(s)
    NR RoHS compliance is not relevant
    Illustration can deviate

    Order No.: 13L2675

    Manufacturer: ECS Cleaning Solutions

    Manufacturer No.:
    560.025.101

    25 pieces

     

     

    1 pack(s) €7.53
    10 pack(s) €6.99
    25 pack(s) €6.56
    50 pack(s) €6.12
    100 pack(s) €5.49
    Without VAT, without shipping costs
    Price per pack(s)
    Minimum Order Quantity 1
      530 pack(s) in stock
    pack(s)
    NR RoHS compliance is not relevant
    Illustration can deviate

    Order No.: 12L914

    Manufacturer: UHU

    Manufacturer No.:
    MISCHER GEBOGEN
    46760

     

     

     

    1 piece(s) €1.71
    10 piece(s) €1.48
    50 piece(s) €1.34
    100 piece(s) €1.25
    250 piece(s) €1.17
    Without VAT, without shipping costs
    Price per piece(s)
    Minimum Order Quantity 1
      471 piece(s) in stock
    piece(s)
    ROHS RoHS compliant version available, last updated: 31.03.2015
    Illustration can deviate

    Order No.: 14L280

    Manufacturer: Certoplast

    Manufacturer No.:
    601 0,15X15MM 10M BLAU

     

    0,15 mm

    Acrylate

    1 piece(s) €1.47
    5 piece(s) €1.32
    10 piece(s) €1.23
    25 piece(s) €1.15
    50 piece(s) €1.09
    Without VAT, without shipping costs
    Price per piece(s)
    Minimum Order Quantity 1
      383 piece(s) in stock
    piece(s)
    ROHS RoHS compliant version available, last updated: 31.03.2015
    Illustration can deviate

    Order No.: 14L282

    Manufacturer: Certoplast

    Manufacturer No.:
    601 0,15X15MM 10M GRÜN

     

    0,15 mm

    Acrylate

    1 piece(s) €1.47
    5 piece(s) €1.32
    10 piece(s) €1.23
    25 piece(s) €1.15
    50 piece(s) €1.09
    Without VAT, without shipping costs
    Price per piece(s)
    Minimum Order Quantity 1
      314 piece(s) in stock
    piece(s)
    ROHS RoHS compliant version available, last updated: 31.03.2015
    Illustration can deviate

    Order No.: 14L272

    Manufacturer: Certoplast

    Manufacturer No.:
    601 0,15X15MM 10M WEIß

     

    0,15 mm

    Acrylate

    1 piece(s) €1.47
    5 piece(s) €1.32
    10 piece(s) €1.23
    25 piece(s) €1.15
    50 piece(s) €1.09
    Without VAT, without shipping costs
    Price per piece(s)
    Minimum Order Quantity 1
      292 piece(s) in stock
    piece(s)
    ROHS RoHS compliant version available, last updated: 31.03.2015
    Illustration can deviate

    Order No.: 13L257

    Manufacturer: Bungard

    Manufacturer No.:
    73110-01

    1 kg

     

     

    1 piece(s) €9.50
    5 piece(s) €8.82
    10 piece(s) €8.27
    25 piece(s) €7.72
    50 piece(s) €6.93
    Without VAT, without shipping costs
    Price per piece(s)
    Minimum Order Quantity 1
      286 piece(s) in stock
    piece(s)

    Etchant, sodium peroxosulphate, type Bungard 73110-01

    For etching in cuvettes

    Etching temperature: +40 to +50 °C

    Etching speed: 7.0 to 1.4 µm/minute

    Copper absorption: max. 30 g/l

    Preparation volume: 200-250 g/l water

    Quantity: 1.0 kg




          

    Signal word: Danger

    Hazard statements:

    • H272 May intensify fire; oxidizer
    • H302 Harmful if swallowed
    • H315 Causes skin irritation
    • H317 May cause an allergic skin reaction
    • H319 Causes serious eye irritation
    • H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled
    • H335 May cause respiratory irritation

    Precautionary statements:

    • P221 Take any precaution to avoid mixing with combustibles...
    • P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
    • P220 Keep away from clothing and other combustible materials.
    • P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
    • P312 Call a POISON CENTRE/doctor/… if you feel unwell.
    • P304 IF INHALED:
    • P405 Store locked up.
    `
    ROHS RoHS compliant version available, last updated: 31.03.2015
    Hazardous substances, no express shipping possible
    Illustration can deviate

    Order No.: 14L270

    Manufacturer: Certoplast

    Manufacturer No.:
    601 0,15X15MM 10M SCHW

     

    0,15 mm

    Acrylate

    1 piece(s) €1.47
    5 piece(s) €1.32
    10 piece(s) €1.23
    25 piece(s) €1.15
    50 piece(s) €1.09
    Without VAT, without shipping costs
    Price per piece(s)
    Minimum Order Quantity 1
      283 piece(s) in stock
    piece(s)
    ROHS RoHS compliant version available, last updated: 31.03.2015
    Illustration can deviate

    Order No.: 13L112

    Manufacturer: Panacol

    Manufacturer No.:
    CYANOLIT 201/2 CCM

    2 g

     

     

    1 piece(s) €2.50
    10 piece(s) €2.27
    25 piece(s) €2.10
    50 piece(s) €1.97
    100 piece(s) €1.86
    Without VAT, without shipping costs
    Price per piece(s)
    Minimum Order Quantity 1
      225 piece(s) in stock
    piece(s)

    Special adhesive, type Cyanolit 201

    Low viscosity, for high strength plastic bonding (hard PVC, PA 6.2, ABS, PC/PMMA), or rubber (natural and nitrile rubber), micro cellular rubber, SBR)

    Base: ethyl.

    Viscosity: 2.0 mPa/s

    Curing time: 7.0 to 20 s

    Tension and shearing strength: 8.0 to 35 N/mm²

    Application temperatures: - 80 to +80 °C

    Quantity: 2.0 g pipette




      

    Signal word: Warning

    Hazard statements:

    • H315 Causes skin irritation
    • H319 Causes serious eye irritation
    • H335 May cause respiratory irritation

    Precautionary statements:

    • P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
    • P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
    • P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
    • P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
    • P312 Call a POISON CENTRE/doctor/… if you feel unwell.
    • P501 Dispose of contents/container to ...

    Supplemental Hazard
    information:

    • EUH202 Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.
    `
    ROHS RoHS compliant version available, last updated: 31.03.2015
    Illustration can deviate

    Order No.: 12L882

    Manufacturer: UHU

    Manufacturer No.:
    PLUS ENDFEST 300 33G
    45640

    33 g

     

     

    1 piece(s) €13.11
    5 piece(s) €12.19
    10 piece(s) €11.26
    Without VAT, without shipping costs
    Price per piece(s)
    Minimum Order Quantity 1
      213 piece(s) in stock
    piece(s)

    2C epoxy resin adhesive, type UHU plus endfest 300

    Solvent-free 2C epoxy resin adhesive for for ultimate strength; Curing time and final strength (up to 30 N/mm²) depend on the temperature. Final strength after 12 h at room temperature. The bonding is impact-resistant and resistant against aging and dampness. Bonds metals, glass, porcelain, ceramic, wood, marble, stone, concrete, Duroplast, glass fiber-reinforced plastic, hard PVC, rubber, rigid foam plastic materials, e.g. Styrofoam®. Not suitable for bonding on large glass surfaces, PE, PP.

    Pot time: up to 90 minutes

    Package: 33 g




        

    Signal word: Warning

    Hazard statements:

    • H315 Causes skin irritation
    • H319 Causes serious eye irritation
    • H317 May cause an allergic skin reaction
    • H411 Toxic to aquatic life with long lasting effects

    Precautionary statements:

    • P101 If medical advice is needed, have product container or label at hand.
    • P102 Keep out of reach of children.
    • P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
    • P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
    • P302+P352 IF ON SKIN: Wash with plenty of water/...
    • P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
    • P501 Dispose of contents/container to ...
    `
    ROHS RoHS compliant version available, last updated: 31.03.2015
    Hazardous substances, no express shipping possible
    Illustration can deviate

    Order No.: 12L4110

    Manufacturer: Kontakt-Chemie

    Manufacturer No.:
    33163-DE

    200 ml

     

     

    1 piece(s) €16.80
    6 piece(s) €15.96
    12 piece(s) €15.16
    Without VAT, without shipping costs
    Price per piece(s)
    Minimum Order Quantity 1
      208 piece(s) in stock
    piece(s)

    Compressed gas cleaner, non-flammable, very economical.

    COMPRESSED AIR 67 is based on a pure, liquefied gas with a low global warming potential (GWP = 7). The dry, oil-free compressed gas leaves no residue and is not flammable according to Directive 2008/47 / EC. The spray can with attachable spray tube allows precise blow-out of dust and dirt. The well-balanced spray system generates a medium-pressure spray and is therefore easy to use, especially for sensitive components.

    Features / Benefits:

    - Dry, oil-free compressed gas, leaves no residue.

    - Non-flammable, safe and environmentally friendly.

    - Balanced, medium-strength spray system, very productive.

    Application examples:

    - Blowing out dust and dirt in electronics and precision mechanics.

    - Easily applicable even to sensitive components such as optics and sensors.




    Signal word: Warning

    Hazard statements:

    • H229 Pressurized container: may burst if heated

    Precautionary statements:

    • P102 Keep out of reach of children.
    • P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
    • P251 Do not pierce or burn, even after use.
    • P336 Thaw frosted parts with lukewarm water. Do not rub affected area.
    • P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
    `
    ROHS RoHS compliant version available, last updated: 31.03.2015
    Hazardous substances, no express shipping possible
    Illustration can deviate

    Order No.: 11L487

    Manufacturer: WD-40

    Manufacturer No.:
    49001

    100 ml

     

     

    1 piece(s) €3.37
    6 piece(s) €3.14
    12 piece(s) €2.90
    24 piece(s) €2.72
    Without VAT, without shipping costs
    Price per piece(s)
    Minimum Order Quantity 1
      197 piece(s) in stock
    piece(s)

    WD-40 Multifunctional oil, five-in-one

    CFC-free, halon-free, no 1.1.1 trichloroethane, no carcinogenic substances. Protects against rust and all other forms of corrosion on metal parts (including in microscopically small recesses), gets under small rusted-on parts, seized screws and nuts, leaves a thin protective film, displaces moisture and prevents the development of further moisture.

    Content: 100ml




        

    Signal word: Danger

    Hazard statements:

    • H336 May cause drowsiness or dizziness
    • H222 Extremely flammable aerosol
    • H229 Pressurized container: may burst if heated

    Precautionary statements:

    • P101 If medical advice is needed, have product container or label at hand.
    • P102 Keep out of reach of children.
    • P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
    • P211 Do not spray on an open flame or other ignition source.
    • P251 Do not pierce or burn, even after use.
    • P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
    • P271 Use only outdoors or in a well-ventilated area.
    • P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor/…
    • P312 Call a POISON CENTRE/doctor/… if you feel unwell.
    • P331 Do NOT induce vomiting.
    • P405 Store locked up.
    • P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
    • P501 Dispose of contents/container to ...

    Supplemental Hazard
    information:

    • EUH066 Repeated exposure may cause skin dryness or cracking.
    `
    NR RoHS compliance is not relevant
    Hazardous substances, no express shipping possible
    Illustration can deviate

    Order No.: 12L4092

    Manufacturer: Kontakt-Chemie

    Manufacturer No.:
    81009-AC
    SOLVENT 50 200ML SPRAY

    200 ml

     

     

    1 piece(s) €9.45
    12 piece(s) €8.98
    48 piece(s) €8.53
    96 piece(s) €8.10
    Without VAT, without shipping costs
    Price per piece(s)
    Minimum Order Quantity 1
      182 piece(s) in stock
    piece(s)

    Solvent 50 Label removing spray from Kontakt Chemie/CRC

    Paper label remover on the basis of natural orange terpene. Saturates label paper and dissolves the adhesive underneath. Most labels can be stripped off in one go after a priming time of 2.0 to 4.0 minutes. The long active time also guarantees effective working in series production.

    Note: Solvent 50 can be used to remove labels from metal, glass, cardboard and many plastic materials. However, it should not be used on solvent-sensitive plastic materials such as acrylic glass or CD sleeves.

    Content: 200ml




          

    Signal word: Danger

    Hazard statements:

    • H222 Extremely flammable aerosol
    • H229 Pressurized container: may burst if heated
    • H315 Causes skin irritation
    • H317 May cause an allergic skin reaction
    • H336 May cause drowsiness or dizziness
    • H410 Very toxic to aquatic life with long lasting effects

    Precautionary statements:

    • P102 Keep out of reach of children.
    • P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
    • P211 Do not spray on an open flame or other ignition source.
    • P251 Do not pierce or burn, even after use.
    • P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
    • P271 Use only outdoors or in a well-ventilated area.
    • P273 Avoid release to the environment.
    • P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
    • P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
    • P501 Dispose of contents/container to ...
    `
    ROHS RoHS compliant version available, last updated: 31.03.2015
    Hazardous substances, no express shipping possible
    Illustration can deviate

    Order No.: 12L4112

    Manufacturer: Kontakt-Chemie

    Manufacturer No.:
    33167-DE

    400 ml

     

     

    1 piece(s) €28.90
    6 piece(s) €27.46
    12 piece(s) €26.09
    Without VAT, without shipping costs
    Price per piece(s)
    Minimum Order Quantity 1
      179 piece(s) in stock
    piece(s)

    Compressed gas cleaner, non-flammable, very economical.

    COMPRESSED AIR 67 is based on a pure, liquefied gas with a low global warming potential (GWP = 7). The dry, oil-free compressed gas leaves no residue and is not flammable according to Directive 2008/47 / EC. The spray can with attachable spray tube allows precise blow-out of dust and dirt. The well-balanced spray system generates a medium-pressure spray and is therefore easy to use, especially for sensitive components.

    Features / Benefits:

    - Dry, oil-free compressed gas, leaves no residue.

    - Non-flammable, safe and environmentally friendly.

    - Balanced, medium-strength spray system, very productive.

    Application examples:

    - Blowing out dust and dirt in electronics and precision mechanics.

    - Easily applicable even to sensitive components such as optics and sensors.




    Signal word: Warning

    Hazard statements:

    • H229 Pressurized container: may burst if heated

    Precautionary statements:

    • P102 Keep out of reach of children.
    • P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
    • P251 Do not pierce or burn, even after use.
    • P336 Thaw frosted parts with lukewarm water. Do not rub affected area.
    • P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
    `
    ROHS RoHS compliant version available, last updated: 31.03.2015
    Hazardous substances, no express shipping possible
    Illustration can deviate

    Order No.: 12L4842

    Manufacturer: Pressol

    Manufacturer No.:
    10 589

    50 g

     

     

    1 piece(s) €3.43
    10 piece(s) €3.18
    50 piece(s) €2.95
    100 piece(s) €2.77
    250 piece(s) €2.40
    Without VAT, without shipping costs
    Price per piece(s)
    Minimum Order Quantity 1
      179 piece(s) in stock
    piece(s)
    NR RoHS compliance is not relevant
    Promotion
    Delivery only while stocks last! Please contact us if you have any questions about this item.
    Illustration can deviate

    Order No.: 12L1055

    Manufacturer: Cramolin

    Manufacturer No.:
    1101411
    TOP-PIN 200ML

    200 ml

     

     

    1 piece(s) €29.67
    Without VAT, without shipping costs
    Price per piece(s)
    Minimum Order Quantity 1
      164 piece(s) in stock
    piece(s)

    Electronic sprays, type Cramolin Top-Pin.

    Can be used as protective agent and lubricant to maintain the functionality of contacts, particularly of pin contacts with precious metal coating. the agent provides excellent lubricating anti-corrosive properties on the basis of synthetic additives. Damage to precious metal layers and any corrosion of base metals is prevented. The thin film has a lubricating effect and it is heat resistant up to +300 °C.

    Type: Top-Pin, spray can, 200 ml




          

    Signal word: Danger

    Hazard statements:

    • H222 Extremely flammable aerosol
    • H229 Pressurized container: may burst if heated
    • H315 Causes skin irritation
    • H336 May cause drowsiness or dizziness
    • H411 Toxic to aquatic life with long lasting effects

    Precautionary statements:

    • P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
    • P211 Do not spray on an open flame or other ignition source.
    • P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
    • P271 Use only outdoors or in a well-ventilated area.
    • P332+P313 If skin irritation occurs: Get medical advice/attention.
    • P251 Do not pierce or burn, even after use.
    • P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
    `
    ROHS RoHS compliant version available, last updated: 31.03.2015
    Hazardous substances, no express shipping possible
    Illustration can deviate

    Order No.: 14L112

    Manufacturer: HellermannTyton

    Manufacturer No.:
    710-00147
    HTAPE-FLEX15-15x10 PVC CL 10

     

    0,15 mm

     

    1 piece(s) €0.79
    10 piece(s) €0.69
    50 piece(s) €0.62
    100 piece(s) €0.57
    500 piece(s) €0.54
    Without VAT, without shipping costs
    Price per piece(s)
    Minimum Order Quantity 1
      135 piece(s) in stock
    piece(s)
    ROHS RoHS compliant version available, last updated: 31.03.2015
    Illustration can deviate

    Order No.: 13L116

    Manufacturer: Panacol

    Manufacturer No.:
    CYANOLIT 202/2 CCM

    2 g

     

     

    1 piece(s) €2.50
    10 piece(s) €2.27
    50 piece(s) €2.10
    100 piece(s) €1.97
    250 piece(s) €1.86
    Without VAT, without shipping costs
    Price per piece(s)
    Minimum Order Quantity 1
      134 piece(s) in stock
    piece(s)

    Special adhesive, type Cyanolit 202

    This adhesive has a higher viscosity compared to the type 201 described above. For high strength plastic bonding (hard PVC, PA 6.2, ABS, PC/PMMA), or rubber (natural and nitrile rubber), micro cellular rubber, SBR)

    Base: ethyl.

    Viscosity: 100 mPa/s

    Curing time: 7.0 to 20 s

    Tension and shearing strength: 8.0 to 35 N/mm²

    Application temperatures: - 80 to +80 °C

    Quantity: 2.0 g pipette




      

    Signal word: Warning

    Hazard statements:

    • H315 Causes skin irritation
    • H319 Causes serious eye irritation
    • H335 May cause respiratory irritation

    Precautionary statements:

    • P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
    • P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
    • P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
    • P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
    • P312 Call a POISON CENTRE/doctor/… if you feel unwell.
    • P501 Dispose of contents/container to ...

    Supplemental Hazard
    information:

    • EUH202 Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.
    `
    ROHS RoHS compliant version available, last updated: 31.03.2015
    Illustration can deviate

    Order No.: 12L966

    Manufacturer: Panacol

    Manufacturer No.:
    PENLOC GTI 2X5ML

    10 g

     

     

    1 piece(s) €6.99
    10 piece(s) €6.47
    50 piece(s) €6.02
    100 piece(s) €5.63
    250 piece(s) €4.89
    Without VAT, without shipping costs
    Price per piece(s)
    Minimum Order Quantity 1
      134 piece(s) in stock
    piece(s)

    High-performance adhesive, type Penloc GTI

    Acrylate base 2C adhesive. Offers excellent flexibility, high force transmission and good thermal resistance. For steel, aluminum, copper, chrome, brass, nickel, zinc, polyester, PVC, ABS, epoxy resins, glass, wood, concrete, stone etc

    Color: clear

    Initial strength: 4.0 to 5.0 min, ultimate strength 4.0 to 6.0 h

    Thermal resistance: - 30 to +150 °C

    Package: twin cartridge 2 x 5.0 ml




          

    Signal word: Danger

    Hazard statements:

    • H225 Highly flammable liquid and vapour
    • H315 Causes skin irritation
    • H319 Causes serious eye irritation
    • H317 May cause an allergic skin reaction
    • H335 May cause respiratory irritation
    • H412 Harmful to aquatic life with long lasting effects
    • H314 Causes severe skin burns and eye damage.

    Precautionary statements:

    • P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
    • P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
    • P273 Avoid release to the environment.
    • P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
    • P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
    • P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
    • P310 Immediately call a POISON CENTER/doctor/…
    `
    ROHS RoHS compliant version available, last updated: 31.03.2015
    Hazardous substances, no express shipping possible
  • 1(current)
  • 2
  • 3